-
Bird of Time Scratch Build
0 KommentarSo, here we go...no classic glid...
-
Bird of Time balsa sheets
0 KommentarIt all starts with scientific st...
-
Bird of Time wing panels
0 KommentarWing panels, pine, carbon fibre ...
-
Bird of Time wing structure
0 KommentarOnce again making good use of th...
-
Constructing Bird of Time Wing
0 Kommentar -
Bird of Time Ribs
0 KommentarBird of time has 2mm wing ribs a...
-
Bird of Time Wing Mid Section
0 KommentarAs said, the wing is a pleasure ...
-
Bird of Time Spoiler Servo
0 KommentarIn case the Bird of Time half as...
-
Bird of Time Extended Fuselage
0 KommentarOriginal Bird of Time sports a r...
-
Bird of Time Fuselage Pattern
0 KommentarCompared to a traditional kit sc...
-
Bird of Time Fuselage Sheet
0 KommentarThe first side panel can be used...
-
Bird of Time RC stuff
0 KommentarContemplating on the RC stuff
-
Bot blue print
0 Kommentarcan you spot the mods?
-
Planing bit
0 KommentarThis little balsa plane does com...
-
Bird of time fuselage sections
0 KommentarHiding some nasty carbon fibre i...
-
Bird of time full flying sabilator
0 KommentarThe original plan for the elevat...
-
Bird of time elevator cable
0 KommentarSo, I plan to utilize a flexible...
-
Bot fun & stab control
0 KommentarAlso the fin will be hollow with...
-
Bot fin going together
0 KommentarThe control cable and stuff seal...
-
Bird of time fin & rudder
0 KommentarBoth the fin and the rudder cons...
-
Bird of time fuselage
0 KommentarRather than use a single 5mm bal...
-
Bot fuse laminated
0 KommentarBench press, with max weights.
-
Bot fuse assembly
0 KommentarFinally al they bits and pieces ...
-
Ugly Bird of time fuselage
0 KommentarFrankly, the fuselage looks (but...
-
Carving out Bird of Time fuselage
0 KommentarSomewhere inside the ugly boxy t...
-
Balsa shavings bot fuselage
0 KommentarThose balsa shavings make great ...
-
Bird of Time vintage kit NIB
0 KommentarOk this was totally reduntand, I...
-
Multiple gliders
0 KommentarWorking on 3-5 planes can take i...
-
Bot nose cone
0 KommentarAttaching the pine nose cone.
-
Bird of time RC assembly
0 KommentarTinkering on the BOT RC stuff. W...
-
BOT fin mounted
0 KommentarThe fin is such an integral part...
-
BOT fuselage
0 KommentarFinal bits going in. Soon it wil...
-
Extended BOT Fuselage
0 KommentarThe fuselage is slightly extende...
-
Bird of Time silk cover
0 Kommentar -
Bird of time Hirth wing shape
0 KommentarBird of time has a distinctive t...
-
Bird of Time Hirth wing shape
0 KommentarThe original plan suggest using ...
-
The Hirth wing fit the Bird of Time
0 KommentarThe PU-bond will cure overnight.
-
Bot right wing panel
0 Kommentar -
Bot outer wing panels
0 Kommentar -
Bot fuselage and wing
0 Kommentar -
Bit wing and fuselage
0 Kommentar -
Bird of time wing fuselage
0 Kommentar -
Bird of time and Aquila by Airtronics
0 KommentarBOT fuselage looksgigantic next ...
-
Bird of Time Rudder Covering
0 KommentarBird of Time Rudder Covering
-
Bird of Time Rudder Koverall
0 KommentarStinky bits
-
BOT Rudder
0 KommentarBOT Rudder with its Koverall fab...
-
Bird of Time leading edge
0 KommentarStronger than standard leading e...
-
Bot trailing edge
0 KommentarScratch building can be logistic...
-
Hirth wing
0 Kommentar -
Bird of time outer wing panels
0 KommentarBird of time outer wing panels h...
-
Hacksaw bot wing
0 KommentarHacksaw blades can be incredibly...
-
Bird of time fuse & Paragon plan
0 KommentarBird of time extended fuselage m...
-
Bird of time canopy
0 KommentarTime for a canopy or should I ju...
-
Scratch build Bird of Time
0 KommentarMy Scratch build Bird of Time a...
-
Red silk Bird of time
0 KommentarI wasn't that exited after cover...
-
Extended BoT fuselage with silk.
0 KommentarWhat I am very pleased with is t...
-
Bot shear web
0 KommentarVery beefy shear web of the BoT ...
-
Bird of time shear webs
0 KommentarBird of time has shear webs like...
-
Bird of Time polyhedral brazes
0 KommentarBird of Time plan call for a sin...
-
Bird of Time polyhedral brazes
0 KommentarBird of Time polyhedral brazes, ...
-
Dihedral brazes mounted
0 KommentarThe dihedral brazes mounted on t...
-
Extended BoT canopy
0 KommentarThe extended BoT canopy trial fi...
-
Bird of time scratch build
0 KommentarBird of time scratch build and ...
-
Bot wings and fuse
0 KommentarIt's quite big actually, 306 cm ...
-
Bird of time wing Vs vintage glider wing
0 KommentarBird of time wing Vs vintage gli...
-
Bird of time tail feather
0 KommentarNot much done on the BOT build I...
-
All-flying tail plane BOT
0 KommentarRather than traditional brass wa...
-
Bird of time stabilator
0 KommentarSome scrap balsa from the Miles ...
-
Bot laminar stabilator
0 KommentarBOT stab is huge, it's also spor...
-
Bird of Time Scratch Build sailplane
0 KommentarTo size up what needs to be done...
-
Bird of Time Scratch Build sailplane
0 KommentarBird of Time Scratch Build sailp...
-
Bird of Time Scratch Build sailplane
0 KommentarBird of Time Scratch Build sailp...
-
Bird of time wing under construction
0 KommentarFinally back on the BOT, the aim...
-
BOT wing panel
0 KommentarThis looks staged, most likely i...
-
Bird of time polyhedral braze
0 KommentarTriple-layer polyhedral braze
-
Bird of time Wing
0 KommentarLong time no see. The wing spar ...
-
Bot outer wing panel.
0 KommentarThinner cap for the outer wing p...
-
Bird of time wing mount
0 KommentarScratch builders life, it might...
-
Bot skin
0 Kommentar -
Bird of time wing skin
0 KommentarHard quolity balsa skin for the ...
-
Bird of time build
0 KommentarThe progress or lack of it thus ...
-
BOT wing mount
0 KommentarBird of time wing mount, such an...