• 
• 
• 
• 
• 
• 
• 

Tell your friend

Panhard Dyna Z Z 1957

General description : 1957 Panhard Dyna Z Aluminum body construction (last year for the aluminum) 850cc flat air-cooled, two-cylinder engine 42HP Four-speed column-mounted manual transmission Light blue exterior with blue and white interior Front-wheel drive and four-wheel drum brakes Center-mounted foglight Previously part of the famous Blackhawk Collection Rare US Market car distributed by French Motors in LA CaliforniaThe French have always been known for doing things differently; for asking why not when others ask why and Mot Xotica Classic Cars has a rolling example of this thought process with a rarely seen 1957 Panhard Dyna Z.The cars paint and trim are in overall very good order. The windows are clear and crack-free while the lights, including the center-mounted foglight, are haze-free and in one piece. This car rides on Michelin 145R40 tires surrounding 16-inch steel wheels with full moon wheel covers.The cars aluminum bodywork is solid and straight, the trunk is in good order with a full-sized spare tire, the engine bay is tidy and the bumpers fit well to the cars body overall.Under the cars clamshell hood is a .9L, flat, air-cooled, two-cylinder engine. It featured a concentric torsion bar valve springs on roller bearings, hollow aluminum push rods with hardened steel tips, roller main bearings and big end rod bearings of Panhard Patent design with an additional set of smaller rollers carrying the roller cage (separator); non-removablecylinder heads, removable steel cylinder liners. The cylinder jugs pulled off the crankcase and pistons like those of Volkswagen air-cooled engines. Soft engine mounts to smooth the engines roughness, a radial flow fan bolted to crankshaft, full cooling shroud, aluminum structure and cooling fins. Herringbone timing gears, steel pinion and a Celcon phenolic gear running with slight interference fit, permissible due to the flexibility of the Celcon.The 850cc engine is connected to a cable-operated four-speed manual cast aluminum case transaxle with second and third synchromesh, transfer gears and second, third and fourth of herringbone design with a column shift. Unlike most front-wheel drive inline engine transaxles, the Panhard gearbox is between the engine and the final drive. The final drive spiral bevel gear is on a primary shaft, then a step-down to differential gear through helical (not herringbone) pinion and gear. The drive shafts concentric tubes with rubber in the space between the inner and outer tubes and cardan (universal) joint at the inner end next to the transaxle, double cardan constant velocity joint at the outer end at the wheel. The car stops via four-wheel drum brakes.Inside, the original blue and white bench seats that can hold six average-sized people are in overall good shape but show some wear from age. The benefit of front-wheel drive is obvious in the cars roomy interior, no center hump needed for a driveshaft as on a rear-drive vehicle. The carpet is fair while the headliner is in good overall condition but has some blemishes. The cars futuristic instrument panel is in good order, as is the two-spoke steering wheel. The cars shift lever is column-mounted, eliminating the need for a floor-mounted shifter and free space for a front center passenger. The inner door panels, mirror glass and shift lever are in good shape. There is a blemish on the passenger side between the doors.In 1955, Citron had taken a 25 percent holding in Panhard's automobile business and during the next two years the national dealership networks of the two businesses were integrated. This gave Citr n and Panhard dealers expanded market coverage, incorporating now asmall car, a medium-sized saloon and alarge car range. It gave the Panhard Dyna Z, during its final years in production, a level of market access thatits predecessorhad never enjoyed and sales benefitted.Themore streamlined Dyna Z replaced the Dyna X in 1954. Like its predecessors, the Dyna X and thePanhard Dynaviaconcept that influenced its design, the Dyna Z's body was originally aluminum with steel tube subframes front and rear joined by steel plate reinforcements in the sills. The decision to use aluminum sheeting for car bodies had been taken at a time when a sudden drop-off in demand for fighter planes had left the producers with a glut of the metal but in subsequent years the relative cost advantage of sheet steel had increased steadily. In summer 1954, the cost penalty of persisting with aluminum bodywork had become financially insupportable and in fall 1955 the latest Dyna Type Z1 had steel bodywork (doors, trunk and hood were still in aluminum though).This car is currently located at our facility in St. Louis, Missouri. Current mileage on the odometer shows 38,746 kilometers or 24,076 miles. It is sold as is, where is, on a clean and clear, mileage exempt title. GET OUT AND DRIVE!!!Click here for our YouTube video!VIN: 1038497Note: Please see full terms and conditions listed below that pertain to the purchase of any said vehicle, thank you.

1957 Panhard Dyna Z Z is listed for sale on ClassicDigest in Bellevue by Specialty Vehicle Dealers Association Member for Not priced.

People who viewed this Panhard Dyna Z also viewed similar Panhard listed at ClassicDigest

Panhard Dyna Z

9900 €

Netherlands

Other cars listed for sale by this dealer

Volvo 780 Bertone

13710 NE 20th Street Bellevue, WA 98005

Volkswagen Beetle Typ1

45000$

13710 NE 20th Street Bellevue, WA 98005

Toyota Supra

13710 NE 20th Street Bellevue, WA 98005

Swift other

40000$

13710 NE 20th Street Bellevue, WA 98005

Cobra Replica

90610$

13710 NE 20th Street Bellevue, WA 98005

More